Component List of the Mini-FM Transmitter

Registors:

• 1    27K 1/4 -1/8 Watt      === (red-violet-orange)
  
• 1    4.7K 1/4 -1/8 Watt     === (yellow-violet-red)
  
• 1    22K 1/4 Watt      === (red-red-orange)
  
• 1    51 1/4 Watt      === (green-brown-black)
  
• 1    1K 1/4 Watt      === (brown-black-red)
  
• 1    300 1/4 Watt     === (orange-black-brown)
  

Capacitors:

• 1   100PF (101) Ceramic
  
• 4    10PF Ceramic
  
• 3    33PF Ceramic
  
• 1    3-4PF Ceramic
  
• 2    0.01MF (103) Ceramic
  
• 1    1-4.7 MF Electrolytic
  

Trimmer Capacitor (optional)

When you make coils by yourself-->Diagram

• 2     40-50PF
  
• 1     10-20PF
  

Coils:

• 1     8.5 Turns Molded Coil (5mm diameter bobbin)(inductance=ca.0.6-0.7MH)
  
• 2     3.5-4.5 Turns Molded Coil (5mm diameter bobbin)(inductance=ca.0.3MH)
  
• You could make them by yourself. Prepare a 5.0 mm diameter cylinderical material and enameled/polyurethane wire of 0.8-1.0 mm diameter.
  The movie shows how to do. Please note that for this work, you must have a frequency counter by all means.
  
  

Inductors:

• 1    1MH Fixed RFC
  
• 1    2.2MH Fixed RFC
  
• 1    4.7MH Fixed RFC
  

Semiconductors:

• 1    2SC1907 Transistor
  
• 1    2SC2538 or 2053 Transistor
  
• 1    2SC1970 Transistor
  
• 1    Variable Capacitor (Vari-cap)[ex. ISV126, IT33 or MV209]

Two sided Copper Plate:

• 1    5 x 10 cm minimum
  
• 15    5 X 5 mm
  

In case you can't obtain this material, you can use "porous circuit board". But it is a compromise, though.

Optional:

• Coax Cable RG-62-u or RG-213[5D2V] -->See "How to make a simple antenna?"
  
  
• Stabilizer for 12 vols (semiconductor) and the necessary capacitor (1000MF Electrolytic/25volts)
  -->See "How to supply the power" and the Diagram.